I'm thinking ahead to the time I work on the study / library / workspace in the WAHM. I really wanted the scientific gentleman of the house to have a nice terrestrial globe (among his other instruments) and decided to refinish a store-bought one to look more 17th century.
Here's the 3 inch (7.5 cm) globe and stand I bought -- it's by Euro Minis and it's dirt cheap :) Typical faux-mahogany stand, and a pretty garish globe, but the basics are usable.
1. Take the globe apart (this was surprisingly easy, besides it's fun sort of wrecking stuff :)).
2. Paint the wood of the base a combination of burnt and raw umber to mimic walnut. Paint the legs black to mimic ebony. Give it two coats of satin varnish.
3. Paint the globe's support brass/bronze.
4. Repaint the globe itself, which took a while :) I painted the whole globe a dirty parchment colour, then roughed in the continents using the Mercator projection as a guide with a darker colour. Then I did a more detailed outline of the continents with a black pen, and finally cleaned up the sea/land meeting points and sketched in some "lettering".
5. Reassemble the globe, with axis straight up and down (as in reference images of globes). Since I had to break the original wooden stick that held the globe in place in its support, I used a length of brass wire as a replacement and I added a little flat brass spacer and bead just for detail.
And here's the finished piece!
Day 10 - Advent Project - It is late, and I am tired. Today, I finished the floor, cut and did the base coat for the hearth, stuccoed the fireplace wall, and put beeswax on the wo...
6 hours ago